Orbital Hingelock TEE Deployer Model 625 Bedienungsanleitung PDF herunterladen

Hingelock

TEE Deployer

Model 625

Hingelock

TEE Deployer

Model 625

Typical Technical Specifications:

Introduction

Hingelock deployer Model 625 was developed to

conduct electric field measurements for the Interactive

Measurements Payload for Shuttle (IMPS) program. This

motorized unit is capable of extending and retracting

a 1.12 inch (2.86 cm) diameter by 32.8 foot (10 meter)

long Tubular Extendible Element (TEE). The deployer

features electrical and mechanical stops at

full-extension and -retraction. A potentiometer, driven

by the moving element, provides a continuous

indication of deployed length. To ensure minimal

distortion due to thermal gradients in a space environ-

ment, material perforations and thermal control

coatings are applied on both the inside and outside TEE

surfaces. An optional motor driven TEE cut-off device

may be added to the configuration shown above. This

deployment mechanism is designed to meet the require-

ments of document MIL-A-083577 (USAF) General

Specification for Moving Mechanical Assemblies for

Space and Launch Vehicles. This unit can be deployed

or retracted in orbit.

Antenna Element

Deployed Length: Up to 32.8 ft

(10 meters)

Diameter: 1.12 in (2.86 cm)

Configuration: Hingelock

Material: Beryllium Copper

0.0045 in

(0.1143 mm) thick

Thermal Control Silver &

Coating: Perforations with

Kapton or Teflon

(if required)

Weight 31.43 gr/ft

(with coatings): (103.12 gr/m)

Deployer

Height: 8.23 in (20.9 cm)

Length: 22 in (55.9 cm)

Width: 6.81 in (17.3 cm)

Total Unit Weight:* 15 lbs (6.7 kg)

Drive Motor: Brushless D.C.

Power: 14 Watts maximum

Voltage: 24-32 Vdc

Deployment Rate: Approximately

1.2 in/sec

(3 cm/sec)

Operating

Temperature Range: -20°C to +70°C

*w/o TEE Cut-Off Device

1 2

Introduction 1
Features 2

Inhaltsverzeichnis

Seite 1 - Introduction

HingelockTEE DeployerModel 625HingelockTEE DeployerModel 625Typical Technical Specifications:IntroductionHingelock deployer Model 625 was developed t

Seite 2 - Features

Orbital Technical Services Division5010 Herzel PlaceBeltsville, MD 20705Phone: (301) 902-1152 FAX: (301) 931-0396www.orbital.com7500 Greenway Ctr. Dr.

Kommentare zu diesen Handbüchern

Keine Kommentare

Orbital Hingelock TEE Deployer Model 625 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Ausrüstung Orbital Hingelock TEE Deployer Model 625 herunter. Orbital Hingelock TEE Deployer Model 625 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Ausrüstung Orbital Hingelock TEE Deployer Model 625